Lớp Quản lý chất lượng GXD
LH: Ms.Huyền Thanh 0985.099.938
Kích để đăng kí học online
Lớp Đo bóc, lập Dự toán
LH: Ms.Thu An 0975.381.900
Kích để đăng kí qua mạng
Lớp Dự toán dự thầu, đấu thầu
LH: Ms.Thanh Mai: 0974.889.500
Kích vào đây đăng kí học
Lớp Thanh quyết toán GXD
LH: Ms.Huyền Thanh 0985.099.938
Kích để đăng kí học online

Biện pháp thi công bằng Tiếng Anh từ A-Z

phamquang1508

Thành viên sắp lên hạng Rất năng động
Bài viết
97
Điểm thành tích
18
3. Formwork combination
Untie reinforcement, steel columns with steel beam and wooden satchel with dimension of more than 10*12 cm
Formwork used with thickness of more than 3 cm. Thickness of corrugated ion formwork is 1.5 to 2 cm
Adjust partition formwork by method: Soft line with tender
Use theololite to check straight degree of formwork system before pouring or using plumb bob to adjust
Use water box machine to check beam formwork system
Clean before pouring concrete
Use bolt and clip instead of nail
 

phamquang1508

Thành viên sắp lên hạng Rất năng động
Bài viết
97
Điểm thành tích
18
4. Construction
Use survey to place the position to build wall on the space
Bricks have right types, grade
Water bricks before construction from 20 to 30 minutes
Mix mortar by machine according to grade. Mixed materials are calculated carefully
Use nylon line to create square angles
Circuit meets to requirement
Full mortar between bricks
 

phamquang1508

Thành viên sắp lên hạng Rất năng động
Bài viết
97
Điểm thành tích
18
A.III.10. APPLYING PROGRESSIVE SCIENCE AND TECHNOLOGY IN CONSTRUCTION
Contractor applies progressive science and technology to execute construction in order to guarantee process and quality. Contractor uses execution machine at maximum level to improve work quality and reduce process time.
- Contractor uses fixative steel type with materials such as: scaffold, satchel, casing to improve work quality and reduce process time.
- Contractor uses elevator system to transport material to high position. This system is tidy and have high feature.
- Contractor uses experienced engineer and employee to execute this construction.
- Contractor supplies adequate amount of fixative formwork, scaffold of all floors on time to guarantee process of construction.
- Supply adequate material on time according to design
- Set up and control process of each detail work
- Contractor will equip communication and electricity system in order to guarantee about regular contact.
 

phamquang1508

Thành viên sắp lên hạng Rất năng động
Bài viết
97
Điểm thành tích
18
A.III.11. LIST OF MAIN MACHINE AND EQUIPMENT IN CONSTRUCTION EXECUTION
No
Machine, equipment name
Quantity
Parameter
Made in
I
Main execution equipment



4
KOBELCO tire digger
01
Vg=0.8 m3
Japan
5
IFA, KAMAZ lorry
07
5-12 ton
German, Russia
6
Sperm compressor
02
20 Cv
China
7
Concrete mixing machine
02
2.8 Kw; 250l
China
8
Mortar mixing concrete
03
150l
China
9
Concrete pumping car
01
80m3/h
German
10
Concrete rammer- drilling rammer
05
1.1 KW
China
11
Concrete rammer- floor rammer
03
1.5 KW
China
12
Iron cutting machine
02
1998
China
13
Iron curving machine
02
1998
China
14
Wielding machine
02
24 KVA
Vietnam
15
Electric generator
01
40 KVA
Japan
16
Concrete driller
02
2.5 KW
German
17
Theodolite
02

Japan
18

02

Japan
19
Pump
03
15-30 m3/h
Korea, Italia
20
MISAKA rammer
02
60-80 Kg
Japan
21
Handle machine
20

Japan, Korea, China, Vietnam
22
Minh Khai finish machine
1200 single unit

Vietnam
23
PAL combination scaffold
600 single unit

Vietnam
24
D68 steel satchel
300

Vietnam
25
Casing types
5000m2
Plywood, metal
Vietnam
26
Safe net, sign
02 unit

Vietnam
II
Experiment check equipment



1

02 unit

Vietnam
2
Shape casting concrete
06 unit

Vietnam
3
Pressing experiment concrete machine
01

Spain
4
Pouring concrete spout
01

Switzerland
5
Experiment steel machine
01

China

All machines are proved to guarantee process. Contractor commits to supply adequate all machines and equipment for execution and have more machines if necessary
 

phamquang1508

Thành viên sắp lên hạng Rất năng động
Bài viết
97
Điểm thành tích
18
A.IV. MAINTENANCE COMMITMENT
Contractor is always concerning about quality, technology, and progress of the project. This is the important factor to decide success and development of company
In project:” Golf club house –Chuong My District- Ha Tay Province”. We commit to warrantee construction work within 12 months from hand–over date .In maintenance time, we allow staffs to help you to solve problems
 

phamquang1508

Thành viên sắp lên hạng Rất năng động
Bài viết
97
Điểm thành tích
18
Part B
FIRE FIGHTING METHOD SAFETY-INSURANCE –ENVIRONMENTAL HYGIENNE SAFETY FOR SURROUNDING WORK
B.I. FIRE FIGHTING METHOD-SAFETY-INSURANCE - ENVIRONMENTAL HYGIENNE SAFETY FOR SURROUNDING WORK
B.I.1.GENERAL EXPLANATION
Fire fighting method, Safety- Insurance –Environmental hygiene, Safety for surrounding works is the leading objective of contractor in execution. To guarantee requirement of investor, contractor will execute these steps:
 

hunter225

Quản trị cấp cao
Bài viết
506
Điểm thành tích
63
Anh PhamQuang ơi, em đang cần Biện pháp thi công này...
Anh có thể gởi qua mail cho em được không...
Email: minhtuankaka@gmail.com
Thanks anh rất nhiều!
 

fire_unicorn

Thành viên mới
Bài viết
2
Điểm thành tích
1
Anh Quang làm ơn post tiếp phần còn lại của Biện pháp được không ạ? Em đang cần tham khảo để bổ sung, chỉnh sửa biện pháp của em. Rất cảm ơn anh.
 

Ludwig

Thành viên mới
Bài viết
4
Điểm thành tích
1
Biện pháp thi công

Part B
FIRE FIGHTING METHOD SAFETY-INSURANCE –ENVIRONMENTAL HYGIENNE SAFETY FOR SURROUNDING WORK
B.I. FIRE FIGHTING METHOD-SAFETY-INSURANCE - ENVIRONMENTAL HYGIENNE SAFETY FOR SURROUNDING WORK
B.I.1.GENERAL EXPLANATION
Fire fighting method, Safety- Insurance –Environmental hygiene, Safety for surrounding works is the leading objective of contractor in execution. To guarantee requirement of investor, contractor will execute these steps:
Chào bác Quang
Bác vui lòng gửi biện pháp thi công này về địa chỉ: info@hoangdungconstruction.com
Cám ơn bác nhiều nha
 

pro.factory

Thành viên nhiều triển vọng
Bài viết
13
Điểm thành tích
3
Anh ơi E cũng đang cần bản này!! AI đã có rồi gửi cho E qua mail :pro.factory@gmail.com

Anh ơi E cũng đang cần bản này!! AI đã có rồi gửi cho E qua mail :pro.factory@gmail.com
 

nhocxumi

Thành viên mới
Bài viết
1
Điểm thành tích
1
cám ơn bác, nhưng mà chán quá, chắc cái này dịch từ TV sang TA. Sai be bét. Chỉ tham khảo dc vài từ chuyên ngành. BTW, thanks bác nhiều.
 

duonga1

Thành viên mới
Bài viết
3
Điểm thành tích
1
bạn có file word không. up lên đây chia sẻ cho anh em với.
 

phamquang1508

Thành viên sắp lên hạng Rất năng động
Bài viết
97
Điểm thành tích
18
Gửi các bạn phần cuối biện pháp thi công. FIRE FIGHTING METHOD SAFETY-INSURANCE –ENVIRONMENTAL HYGIENNE SAFETY FOR SURROUNDING WORK
B.I. FIRE FIGHTING METHOD-SAFETY-INSURANCE - ENVIRONMENTAL HYGIENNE SAFETY FOR SURROUNDING WORK
B.I.1.GENERAL EXPLANATION
Fire fighting method, Safety- Insurance –Environmental hygiene, Safety for surrounding works is the leading objective of contractor in execution. To guarantee requirement of investor, contractor will execute these steps:
B.I.2. SAFETY-INSURANCE FOR WORKER, RISK OF CONTRACTOR
* Separate work site with surrounding site by fence B40.Entrance have lock .People that are not concerning about the work are not allowed to go into.
* There is signpost in construction site
* There regulation table to note working hour
* There is safety network from company to construction team
* Workers are trained regulations, safety methods and equipped safety equipments
* There are safety equipments when connecting or combining
* From the date of starting work to maintenance, contractor buys insurance for workers, materials, equipments, risk insurance for contractor
* In stairwell, lobby, floor, ceiling…there are temporary handrail system to cover and signpost
* Stretch guard-net B40 when executing secondary floor. Its width is 3m and carried by U400 column. We always have enough equipment to cover
* Check strict and conduct to take over
* Prohibit smoking, drinking while working
* Workers have heath certificates
* B40 guard- net is stretched to prevent pollution, dust…
* Under ground electricity systems
* Equipments are checked in periodically
* Check and supervise workers regularly
* There are medical staffs in work
B.I.3 SAFETY FOR EQUIPMENTS AND MATERIALS
- Control materials .Avoid putting materials on the transport road
- Cover and protect materials and equipments carefully
- Check machines and safety systems before using
- Arrange fire fighting equipments like water, fire-extinguisher, CO2 in inflammable places
- Check all equipments before using
B.I.4. SECURITY
- Workers must sign labor contract before executing in construction work. They must
have clear resume and experience in company. Avoid employing labors that do not have resume
- There is entrance.
- There are entrance card for labors
- Avoid breaking the law, company commits to co-ordinate with local security to execute
B.I.5. ENVIRONMENTAL SANITATION
- All transport means are covered; avoid dust, pollution for surrounding environment. -- Clean them before leaving the environment
- Avoid cutting trees
- Limit noise .Gather materials while there are little people
- Distribute a team to clean
- Contractor and investor repair damage in case of flood, earthquake
B.I.6.Fire, earthquake, flood and storm preventing method
- All of employees working in construction must be trained to have enough knowledge about preventing fire. All employees have the same action against fire. Safeguard is also a fireman.
- Have sign about forbidding fire. At construction, beside water container, it must have pump, rubber pipe 50, stair and other tools. Arrange CO2 pot, sand bucket, water container in dangerous position.
- Electricity transport wire has enough capacity and right uses. Don’t use additional charge
- Need a periodic check and have comments timely.
- Set up and train preventing team. Register address to nearest fighting office. Set up regulation about fire preventing.
- Check regularly fighting fire tools such as: bamboo ladder, pump, bucket….
- Set up temporary thunder protection system when construction is executed.
B.II. SAFETY FOR SURROUNDING WORK
Contractor survey the plan before starting. Placing surrounding works, underground works
Base on practical plan, contractor makes sure that execution procedure does not affect to works, activities. Contractor contact with investor to solve problems
+ Contractor hangs guard-net to cover and prevent surrounding works from dust, noise
+ Clean regularly, reduce noise in execution
 

Tải bộ cài phần mềm Dự toán GXD, Đấu thầu GXD, Thanh Quyết toán GXD, Quản lý chất lượng GXD. Dành cho người mua bản quyền
Kích để xem khóa học Dự toán công trình
Kích để xem khóa học Dự toán công trình
Hãy kích để tới bài giới thiệu Khóa học Đọc bản vẽ và đo bóc khối lượng
Phần mềm quản lý chất lượng công trình QLCL GXD
Tìm hiểu khóa học Thanh Quyết toán GXD
Top Bottom