Virote Boonyapinyo, Hitoshi Yamada and Toshio Miyata.(1994).”Wind-induced Nonlinear Lateral-Torsional Buckling of Cable-Stayed Bridges, Journal of Structural Engineering Vol.120/2
http://www.box.net/shared/m0epy3y8rq
===================================================================================
Abolghasem Saneinejad and Brian Hoobs .(1995). “Inelastic Design of Infilled Frames”, Journal of Structural Engineering, Vol.121/4
http://www.box.net/public/xqup9h3skn
===================================================================================
M.S Pfeil and R.C. Batista.(1995). “Aerodynamic Stability Analysis of Cable-Stayed Bridges”, Journal of Structural Engineering, Vol.121/12
http://www.box.net/shared/pcx5rr3o6o
===================================================================================
Madan, A., Reinhorn, A.M., Mander, J.B., and Valles, R.E. (1997). “Modeling of Masonry Infill Panels for Structural Analysis”, Journal of Structural Engineering Vol.123/10
http://www.box.net/shared/dxhv81mg3n
===================================================================================
Muhammad N. S. Hadi and Yoyong Arfiadi.(1998). “Optimum Desing of Absorber for MDOF Structures, Journal of Structural Engineering, Vol. 124/11
http://www.box.net/shared/555ufxtpnh
===================================================================================
Balaur S. Dhillon, James W. O’Malley III .(1999). “Interactive Design of Semirigid Steel Frames”, Journal of Structural Engineering, May 1999
http://www.box.net/public/ei38m4o2qx
===================================================================================
M.A. Polak and F.J. Vecchio .(1993). “Nonlinear Analysis of Reinforced-Concrete Shells”, Journal of Structural Engineering, Vol.119 / 12
http://wiryanto.files.wordpress.com/2006/11/jp19.pdf
===================================================================================
Joseph M. Bracci, Sashi K. Kunnath and Andrei M. Reinhorn .(1997). “Seismic Performance and Retrofit Evaluation of Reinforced Concrete Structures”, Journal of Structural Enginering, Vol. 123 / 1
http://wiryanto.files.wordpress.com/2006/11/kunnath-and-reinhorn.pdf
===================================================================================
Suchart Limkatanyu and Enrico Spacone .(2002). “Reinforced Concrete Frame Element with Bond Interfaces II: State Determinations and Numerical Validation”, Journal of Structural Engineering, Vol. 128 / 3
http://wiryanto.files.wordpress.com/2006/11/spaconelimkatanyuasce-st-3-2002b.pdf
===================================================================================
Qing Quan Liang, Brian Uy, and Grant P. Steven . (2002). “Performance-Based Optimization for Strut-Tie Modeling of Structural Concrete”, Journal of Structural Engineering, Vol.128 / 6
http://www.box.net/shared/yh6dda6n05
===================================================================================
Mettupalayam V. Sivaselvan and Andrei M. Reinhorn .(2002). “Collapse Analysis: Large Inelastic Deformations Analysis of Planar Frames”, Journal of StructuralEngineering, Vol. 128 / 12
http://wiryanto.files.wordpress.com/2006/11/sivaselvan-and-reinhorn_large.pdf
===================================================================================
F.J. Vecchio and W. Shim .(2004). “Experimental and Analytical Re-examination of Classic Concrete Beam Tests”, Journal of Structrual Engineering, Vol. 130 / 3
http://wiryanto.files.wordpress.com/2006/11/jp49.pdf
===================================================================================
Jianguo Nie, Jiansheng Fan and C. S. Cai . (2004). “Stiffness and Deflection of Steel-Concrete Composite Beams under Negative Bending”, Journal of Structural Engineering, Vol. 130 / 11
http://wiryanto.files.wordpress.com...te-composite-beams-under-negative-bending.pdf
===================================================================================
Dimitrios Vamvatsikos and C. Allin Cornell . (2005). “Direct Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom Systems through Incremental Dynamic Analysis of Single Degree of Freedom Approximation”, Journal of Structural Engineering, Vol. 131 / 4
http://wiryanto.files.wordpress.com/2006/11/demand_and_capacity_through_spo2ida.pdf
===================================================================================
Tadeh Zirakian and Hossein Showkati. (2007). “Experiments on Distortional Buckling of I-Beams”, Journal of Structural Engineering, Vol. 133 / 7
http://www.box.net/shared/hq52ypo82v
===================================================================================
Vu Phan, M. Saiid Saiidi, John Anderson and Hamid Ghasemi.(2007). “Near-Fault Ground Motion Effects on Reinforced Concrete Bridge Columns”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/dgkpbe93ry
===================================================================================
Murat Dicleli and Anshu Mehta.(2007). “Efficient Energy Dissipating Steel-Braced Frame to Resist Seismic Loads”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/8h2gt5lpxb
===================================================================================
Feng Zhou, Khalid M. Mosalam and Masayoshi Nakashima.(2007). “Finite-Element Analysis of a Composite Frame under Large Lateral Cyclic Loading”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/98×4thafes
===================================================================================
K. A. Riederer and T. Haukaas.(2007). “Cost-Benefit Importance Vectors for Performance-Based Structural Engineering”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/48m7r9rh3c
http://www.box.net/shared/m0epy3y8rq
===================================================================================
Abolghasem Saneinejad and Brian Hoobs .(1995). “Inelastic Design of Infilled Frames”, Journal of Structural Engineering, Vol.121/4
http://www.box.net/public/xqup9h3skn
===================================================================================
M.S Pfeil and R.C. Batista.(1995). “Aerodynamic Stability Analysis of Cable-Stayed Bridges”, Journal of Structural Engineering, Vol.121/12
http://www.box.net/shared/pcx5rr3o6o
===================================================================================
Madan, A., Reinhorn, A.M., Mander, J.B., and Valles, R.E. (1997). “Modeling of Masonry Infill Panels for Structural Analysis”, Journal of Structural Engineering Vol.123/10
http://www.box.net/shared/dxhv81mg3n
===================================================================================
Muhammad N. S. Hadi and Yoyong Arfiadi.(1998). “Optimum Desing of Absorber for MDOF Structures, Journal of Structural Engineering, Vol. 124/11
http://www.box.net/shared/555ufxtpnh
===================================================================================
Balaur S. Dhillon, James W. O’Malley III .(1999). “Interactive Design of Semirigid Steel Frames”, Journal of Structural Engineering, May 1999
http://www.box.net/public/ei38m4o2qx
===================================================================================
M.A. Polak and F.J. Vecchio .(1993). “Nonlinear Analysis of Reinforced-Concrete Shells”, Journal of Structural Engineering, Vol.119 / 12
http://wiryanto.files.wordpress.com/2006/11/jp19.pdf
===================================================================================
Joseph M. Bracci, Sashi K. Kunnath and Andrei M. Reinhorn .(1997). “Seismic Performance and Retrofit Evaluation of Reinforced Concrete Structures”, Journal of Structural Enginering, Vol. 123 / 1
http://wiryanto.files.wordpress.com/2006/11/kunnath-and-reinhorn.pdf
===================================================================================
Suchart Limkatanyu and Enrico Spacone .(2002). “Reinforced Concrete Frame Element with Bond Interfaces II: State Determinations and Numerical Validation”, Journal of Structural Engineering, Vol. 128 / 3
http://wiryanto.files.wordpress.com/2006/11/spaconelimkatanyuasce-st-3-2002b.pdf
===================================================================================
Qing Quan Liang, Brian Uy, and Grant P. Steven . (2002). “Performance-Based Optimization for Strut-Tie Modeling of Structural Concrete”, Journal of Structural Engineering, Vol.128 / 6
http://www.box.net/shared/yh6dda6n05
===================================================================================
Mettupalayam V. Sivaselvan and Andrei M. Reinhorn .(2002). “Collapse Analysis: Large Inelastic Deformations Analysis of Planar Frames”, Journal of StructuralEngineering, Vol. 128 / 12
http://wiryanto.files.wordpress.com/2006/11/sivaselvan-and-reinhorn_large.pdf
===================================================================================
F.J. Vecchio and W. Shim .(2004). “Experimental and Analytical Re-examination of Classic Concrete Beam Tests”, Journal of Structrual Engineering, Vol. 130 / 3
http://wiryanto.files.wordpress.com/2006/11/jp49.pdf
===================================================================================
Jianguo Nie, Jiansheng Fan and C. S. Cai . (2004). “Stiffness and Deflection of Steel-Concrete Composite Beams under Negative Bending”, Journal of Structural Engineering, Vol. 130 / 11
http://wiryanto.files.wordpress.com...te-composite-beams-under-negative-bending.pdf
===================================================================================
Dimitrios Vamvatsikos and C. Allin Cornell . (2005). “Direct Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom Systems through Incremental Dynamic Analysis of Single Degree of Freedom Approximation”, Journal of Structural Engineering, Vol. 131 / 4
http://wiryanto.files.wordpress.com/2006/11/demand_and_capacity_through_spo2ida.pdf
===================================================================================
Tadeh Zirakian and Hossein Showkati. (2007). “Experiments on Distortional Buckling of I-Beams”, Journal of Structural Engineering, Vol. 133 / 7
http://www.box.net/shared/hq52ypo82v
===================================================================================
Vu Phan, M. Saiid Saiidi, John Anderson and Hamid Ghasemi.(2007). “Near-Fault Ground Motion Effects on Reinforced Concrete Bridge Columns”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/dgkpbe93ry
===================================================================================
Murat Dicleli and Anshu Mehta.(2007). “Efficient Energy Dissipating Steel-Braced Frame to Resist Seismic Loads”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/8h2gt5lpxb
===================================================================================
Feng Zhou, Khalid M. Mosalam and Masayoshi Nakashima.(2007). “Finite-Element Analysis of a Composite Frame under Large Lateral Cyclic Loading”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/98×4thafes
===================================================================================
K. A. Riederer and T. Haukaas.(2007). “Cost-Benefit Importance Vectors for Performance-Based Structural Engineering”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/48m7r9rh3c
